Bowers & Wilkins Px7 S2e EQ settings for Mac

Measured EQ correction for the Bowers & Wilkins Px7 S2e, the specs that matter, and what changes when you use them with a Mac. Copy the settings and apply them in one click.

The short answer

  • Lowers the bass below 200 Hz by about 3.5 to 5.5 dB.
  • Adds about 2 to 4.5 dB from 1.5 to 2.5 kHz, most near 2 kHz.
  • Adds about 1.5 to 2 dB from 7 to 9 kHz.
  • Leaves the treble above 12 kHz close to flat.
Get the exact values

Px7 S2e at a glance

Wireless over-ear headphones with ANC and bio-cellulose drivers, released in 2023. Official specifications from Bowers & Wilkins:

Driver
40 mm bio-cellulose dynamic
ANC
Hybrid, six microphones (four for ANC, two for calls)
Bluetooth
5.2
Battery
Up to 30 h; 15-min charge ≈ 7 h
Weight
307 g

Sources: Audio46: Px7 S2e specifications (details provided by Bowers & Wilkins).

Using the Px7 S2e with a Mac

Codec: AAC, not aptX, aptX HD or aptX Adaptive. The Px7 S2e support SBC, AAC, aptX, aptX HD and aptX Adaptive, but macOS doesn't support aptX, aptX HD or aptX Adaptive. On a Mac they play over AAC, which carries the full 20 Hz to 20 kHz range at standard sample rates (44.1 or 48 kHz).

Calls sound worse than music. As soon as an app uses the headphones' microphone (Zoom, FaceTime, a dictation shortcut), Bluetooth switches to hands-free mode, which has much lower audio quality. Pick your Mac's built-in microphone as the input to keep the Px7 S2e in stereo music mode.

Multipoint. Connects to two devices at once; on a Mac, AAC is used regardless of the second device.

AAC on Mac The Px7 S2e supports aptX Adaptive for Android. macOS doesn't support aptX, so on a Mac the headphones connect over AAC.

Noise control without your phone. Bowers & Wilkins' app only runs on phones. TuningMac shows the Px7 S2e's own noise control choices in your Mac's menu bar, such as Noise Cancellation, Pass-Through or Auto, depending on the model. It recognises your model even if you've renamed your headphones, and only ever connects to your own pair. How it works

What the measurements show

This correction comes from AutoEQ, based on oratory1990's measurements of the Px7 S2e. It shows how much to boost or cut at each frequency to bring the headphones closer to AutoEQ's neutral target:

−12 dB−6 dB+6 dB+12 dB20501002005001k2k5k10k20k
EQ correction for the Bowers & Wilkins Px7 S2e (AutoEQ, oratory1990 measurement). Above the line is a boost, below is a cut.
  • Lowers the bass below 200 Hz by about 3.5 to 5.5 dB.
  • Adds about 2 to 4.5 dB from 1.5 to 2.5 kHz, most near 2 kHz.
  • Adds about 1.5 to 2 dB from 7 to 9 kHz.
  • Leaves the treble above 12 kHz close to flat.

Fit, ear pads and your own ears all change what you hear, and neutral isn't everyone's favourite sound. Use this as a starting point, then adjust by ear.

Apply it in TuningMac (parametric EQ)

TuningMac's Advanced EQ imports this format directly. Copy the settings, then:

  1. Open TuningMac ▸ Settings ▸ Advanced EQ with your Px7 S2e connected.
  2. Turn on Use Advanced EQ for Px7 S2e (or whatever you've named them on your Mac).
  3. Choose More ▸ Paste from Clipboard.

TuningMac saves it for your Px7 S2e and loads it whenever they connect.

ParametricEQ.txt (Equalizer APO / AutoEQ format)
Preamp: -4.4 dB
Filter 1: ON LSC Fc 105 Hz Gain -5.6 dB Q 0.70
Filter 2: ON PK Fc 202 Hz Gain -4.0 dB Q 1.14
Filter 3: ON PK Fc 1938 Hz Gain 4.6 dB Q 1.74
Filter 4: ON PK Fc 473 Hz Gain 1.7 dB Q 1.27
Filter 5: ON PK Fc 980 Hz Gain -1.6 dB Q 1.67
Filter 6: ON HSC Fc 10000 Hz Gain -0.1 dB Q 0.70
Filter 7: ON PK Fc 43 Hz Gain 2.4 dB Q 3.61
Filter 8: ON PK Fc 8012 Hz Gain 2.1 dB Q 2.17
Filter 9: ON PK Fc 3528 Hz Gain 1.6 dB Q 3.57
Filter 10: ON PK Fc 2918 Hz Gain -2.0 dB Q 5.25

Tune your Px7 S2e on your Mac

Download for Mac
#TypeFrequencyGainQ
1Low Shelf105 Hz−5.6 dB0.70
2Bell202 Hz−4.0 dB1.14
3Bell1.94 kHz+4.6 dB1.74
4Bell473 Hz+1.7 dB1.27
5Bell980 Hz−1.6 dB1.67
6High Shelf10 kHz−0.1 dB0.70
7Bell43 Hz+2.4 dB3.61
8Bell8.01 kHz+2.1 dB2.17
9Bell3.53 kHz+1.6 dB3.57
10Bell2.92 kHz−2.0 dB5.25

Preamp: −4.4 dB. It lowers the overall level so the boosts don't clip.

Prefer simple sliders? The 10-band version

No Advanced EQ needed: AutoEQ also gives values for a standard 10-band equalizer, the same bands as TuningMac's main EQ. In the menu bar popover choose Custom, set each slider, and set the preamp to about −4.0 dB.

31
−6.7
62
−2.5
125
−3.5
250
−2.6
500
+2.2
1k
−2.1
2k
+4.4
4k
−0.2
8k
+2.3
16k
−1.8

Values in dB, at 31 Hz to 16 kHz. The parametric version above is more precise.

Questions

Which codec do the Bowers & Wilkins Px7 S2e use on a Mac?+

AAC. The Px7 S2e support SBC, AAC, aptX, aptX HD and aptX Adaptive, but macOS doesn't support aptX, aptX HD or aptX Adaptive, so on a Mac they play over AAC. That carries 20 Hz to 20 kHz audio at standard sample rates.

What are the best EQ settings for the Bowers & Wilkins Px7 S2e?+

AutoEQ's correction, based on oratory1990's measurements, lowers the bass below 200 Hz by up to 5.5 dB, adds up to 4.5 dB from 1.5 to 2.5 kHz and adds up to 2 dB from 7 to 9 kHz, with a preamp of -4.4 dB. The exact values are on this page, ready to copy. Treat it as a neutral starting point and adjust to taste.

Why do my Bowers & Wilkins Px7 S2e sound bad on calls on a Mac?+

When an app uses the headphones' microphone, Bluetooth switches from stereo music mode to a hands-free call mode with much lower audio quality. To keep music quality during calls, choose your Mac's built-in microphone as the input instead. TuningMac's Input list does this in one click, and its Device Info shows which mode you're in.

Can I control the Bowers & Wilkins Px7 S2e's noise cancelling from a Mac?+

Bowers & Wilkins' app only runs on phones. TuningMac shows the Px7 S2e's own noise control choices in your Mac's menu bar, such as Noise Cancellation, Pass-Through or Auto, depending on the model. It recognises your model even if you've renamed your headphones, and only ever connects to your own pair.

Should I turn off the EQ in Bowers & Wilkins' app?+

For the most accurate result, yes. An equalizer set in Bowers & Wilkins' app is applied inside the headphones, so it also affects your Mac and would add to this correction. TuningMac's EQ only changes sound from your Mac, so it won't affect your phone.

Tune your Px7 S2e on your Mac

Parametric and 10-band EQ, noise control and battery in the menu bar.

Download for Mac

EQ data from AutoEQ by Jaakko Pasanen (MIT licence), measurement by oratory1990. Specifications from Bowers & Wilkins' published specifications. Bowers & Wilkins Px7 S2e is a trademark of Bowers & Wilkins; TuningMac is not affiliated with Bowers & Wilkins.