Focal Hadenys EQ settings for Mac

Measured EQ correction for the Focal Hadenys, the specs that matter, and what changes when you use them with a Mac. Copy the settings and apply them in one click.

The short answer

  • Adds about 6 dB of bass shelf.
  • Cuts about 6 dB below 53 Hz to tighten sub-bass.
  • Cuts about 4 dB around 3.6 kHz.
  • Adds about 3 dB around 2.4 kHz.
Get the exact values

Hadenys at a glance

Wired open-back dynamic-driver headphone. Official specifications from Focal:

Driver
40 mm aluminium/magnesium M-shaped dome
Impedance
55 Ω
Sensitivity
104 dB/mW
Weight
420 g
Cable
Detachable, 3 m (3.5 mm)

Sources: AutoEQ (oratory1990).

Using the Hadenys with a Mac

Wired, so no Bluetooth codec. The Hadenys connect with a cable, so nothing is compressed on the way: plug them into the Mac's headphone jack, or a USB-C adapter or DAC.

Calls sound worse than music. As soon as an app uses the headphones' microphone (Zoom, FaceTime, a dictation shortcut), Bluetooth switches to hands-free mode, which has much lower audio quality. Pick your Mac's built-in microphone as the input to keep the Hadenys in stereo music mode.

What the measurements show

This correction comes from AutoEQ, based on oratory1990's measurements of the Hadenys. It shows how much to boost or cut at each frequency to bring the headphones closer to AutoEQ's neutral target:

−12 dB−6 dB+6 dB+12 dB20501002005001k2k5k10k20k
EQ correction for the Focal Hadenys (AutoEQ, oratory1990 measurement). Above the line is a boost, below is a cut.
  • Adds about 6 dB of bass shelf.
  • Cuts about 6 dB below 53 Hz to tighten sub-bass.
  • Cuts about 4 dB around 3.6 kHz.
  • Adds about 3 dB around 2.4 kHz.

Fit, ear pads and your own ears all change what you hear, and neutral isn't everyone's favourite sound. Use this as a starting point, then adjust by ear.

Apply it in TuningMac (parametric EQ)

TuningMac's Advanced EQ imports this format directly. Copy the settings, then:

  1. Open TuningMac ▸ Settings ▸ Advanced EQ with your Hadenys connected.
  2. Turn on Use Advanced EQ for Hadenys (or whatever you've named them on your Mac).
  3. Choose More ▸ Paste from Clipboard.

TuningMac saves it for your Hadenys and loads it whenever they connect.

ParametricEQ.txt (Equalizer APO / AutoEQ format)
Preamp: -3.4 dB
Filter 1: ON LSC Fc 105 Hz Gain 6.3 dB Q 0.70
Filter 2: ON PK Fc 53 Hz Gain -6.4 dB Q 0.50
Filter 3: ON PK Fc 432 Hz Gain 1.5 dB Q 2.45
Filter 4: ON PK Fc 2376 Hz Gain 3.1 dB Q 3.04
Filter 5: ON PK Fc 3557 Hz Gain -3.5 dB Q 4.37
Filter 6: ON HSC Fc 10000 Hz Gain 0.4 dB Q 0.70
Filter 7: ON PK Fc 1095 Hz Gain -0.9 dB Q 2.21
Filter 8: ON PK Fc 4998 Hz Gain 2.0 dB Q 5.07
Filter 9: ON PK Fc 6125 Hz Gain -2.2 dB Q 6.00
Filter 10: ON PK Fc 654 Hz Gain 0.5 dB Q 2.56
#TypeFrequencyGainQ
1Low Shelf105 Hz+6.3 dB0.70
2Bell53 Hz−6.4 dB0.50
3Bell432 Hz+1.5 dB2.45
4Bell2.38 kHz+3.1 dB3.04
5Bell3.56 kHz−3.5 dB4.37
6High Shelf10 kHz+0.4 dB0.70
7Bell1.09 kHz−0.9 dB2.21
8Bell5 kHz+2.0 dB5.07
9Bell6.13 kHz−2.2 dB6.00
10Bell654 Hz+0.5 dB2.56

Preamp: −3.4 dB. It lowers the overall level so the boosts don't clip.

Prefer simple sliders? The 10-band version

No Advanced EQ needed: AutoEQ also gives values for a standard 10-band equalizer, the same bands as TuningMac's main EQ. In the menu bar popover choose Custom, set each slider, and set the preamp to about −2.0 dB.

31
+2.1
62
−1.0
125
−1.0
250
−0.9
500
+1.5
1k
−1.6
2k
+2.5
4k
−1.9
8k
+1.2
16k
−0.1

Values in dB, at 31 Hz to 16 kHz. The parametric version above is more precise.

Questions

Do the Focal Hadenys need a Bluetooth codec on a Mac?+

None: the Hadenys are wired. Plug them into the Mac's headphone jack, or a USB-C adapter or DAC, and the sound reaches them without Bluetooth compression.

What are the best EQ settings for the Focal Hadenys?+

AutoEQ's correction, based on oratory1990's measurements, adds about 6 dB of bass shelf, cuts about 6 dB below 53 Hz, adds about 3 dB around 2.4 kHz, with a preamp of -3.4 dB. The exact values are on this page, ready to copy. Treat it as a neutral starting point and adjust to taste.

Why do my Focal Hadenys sound bad on calls on a Mac?+

When an app uses the headphones' microphone, Bluetooth switches from stereo music mode to a hands-free call mode with much lower audio quality. To keep music quality during calls, choose your Mac's built-in microphone as the input instead. TuningMac's Input list does this in one click, and its Device Info shows which mode you're in.

Should I turn off the EQ in Focal's app?+

For the most accurate result, yes. An equalizer set in Focal's app is applied inside the headphones, so it also affects your Mac and would add to this correction. TuningMac's EQ only changes sound from your Mac, so it won't affect your phone.

Tune your Hadenys on your Mac

Parametric and 10-band EQ, noise control and battery in the menu bar.

Download for Mac

EQ data from AutoEQ by Jaakko Pasanen (MIT licence), measurement by oratory1990. Specifications from Focal's published specifications. Focal Hadenys is a trademark of Focal; TuningMac is not affiliated with Focal.