Focal Celestee EQ settings for Mac
Measured EQ correction for the Focal Celestee, the specs that matter, and what changes when you use them with a Mac. Copy the settings and apply them in one click.
The short answer
- Adds about 5 dB around 4 kHz for presence.
- Adds about 4 dB around 8.3 kHz for treble detail.
- Cuts about 3 dB around 104 Hz to tighten mid-bass.
- Cuts about 3 dB around 1.2 kHz.
Celestee at a glance
Wired closed-back dynamic-driver headphone. Official specifications from Focal:
- Driver
- 40 mm aluminium/magnesium M-shaped dome
- Impedance
- 35 Ω
- Sensitivity
- 105 dB/mW
- Weight
- 430 g
- Cable
- Detachable, 1.2 m (3.5 mm)
Sources: AutoEQ (oratory1990).
Using the Celestee with a Mac
Wired, so no Bluetooth codec. The Celestee connect with a cable, so nothing is compressed on the way: plug them into the Mac's headphone jack, or a USB-C adapter or DAC.
Calls sound worse than music. As soon as an app uses the headphones' microphone (Zoom, FaceTime, a dictation shortcut), Bluetooth switches to hands-free mode, which has much lower audio quality. Pick your Mac's built-in microphone as the input to keep the Celestee in stereo music mode.
What the measurements show
This correction comes from AutoEQ, based on oratory1990's measurements of the Celestee. It shows how much to boost or cut at each frequency to bring the headphones closer to AutoEQ's neutral target:
- Adds about 5 dB around 4 kHz for presence.
- Adds about 4 dB around 8.3 kHz for treble detail.
- Cuts about 3 dB around 104 Hz to tighten mid-bass.
- Cuts about 3 dB around 1.2 kHz.
Fit, ear pads and your own ears all change what you hear, and neutral isn't everyone's favourite sound. Use this as a starting point, then adjust by ear.
Apply it in TuningMac (parametric EQ)
TuningMac's Advanced EQ imports this format directly. Copy the settings, then:
- Open TuningMac ▸ Settings ▸ Advanced EQ with your Celestee connected.
- Turn on Use Advanced EQ for Celestee (or whatever you've named them on your Mac).
- Choose More ▸ Paste from Clipboard.
TuningMac saves it for your Celestee and loads it whenever they connect.
Preamp: -5.6 dB Filter 1: ON LSC Fc 105 Hz Gain -0.3 dB Q 0.70 Filter 2: ON PK Fc 1200 Hz Gain -2.5 dB Q 0.80 Filter 3: ON PK Fc 4064 Hz Gain 5.4 dB Q 3.57 Filter 4: ON PK Fc 8300 Hz Gain 3.6 dB Q 1.23 Filter 5: ON PK Fc 104 Hz Gain -3.2 dB Q 2.00 Filter 6: ON HSC Fc 10000 Hz Gain -1.3 dB Q 0.70 Filter 7: ON PK Fc 223 Hz Gain 0.8 dB Q 1.44 Filter 8: ON PK Fc 46 Hz Gain 0.8 dB Q 2.90 Filter 9: ON PK Fc 142 Hz Gain -1.0 dB Q 3.65 Filter 10: ON PK Fc 2233 Hz Gain 1.3 dB Q 6.00
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low Shelf | 105 Hz | −0.3 dB | 0.70 |
| 2 | Bell | 1.2 kHz | −2.5 dB | 0.80 |
| 3 | Bell | 4.06 kHz | +5.4 dB | 3.57 |
| 4 | Bell | 8.3 kHz | +3.6 dB | 1.23 |
| 5 | Bell | 104 Hz | −3.2 dB | 2.00 |
| 6 | High Shelf | 10 kHz | −1.3 dB | 0.70 |
| 7 | Bell | 223 Hz | +0.8 dB | 1.44 |
| 8 | Bell | 46 Hz | +0.8 dB | 2.90 |
| 9 | Bell | 142 Hz | −1.0 dB | 3.65 |
| 10 | Bell | 2.23 kHz | +1.3 dB | 6.00 |
Preamp: −5.6 dB. It lowers the overall level so the boosts don't clip.
Prefer simple sliders? The 10-band version
No Advanced EQ needed: AutoEQ also gives values for a standard 10-band equalizer, the same bands as TuningMac's main EQ. In the menu bar popover choose Custom, set each slider, and set the preamp to about −4.0 dB.
Values in dB, at 31 Hz to 16 kHz. The parametric version above is more precise.
Questions
Do the Focal Celestee need a Bluetooth codec on a Mac?+
None: the Celestee are wired. Plug them into the Mac's headphone jack, or a USB-C adapter or DAC, and the sound reaches them without Bluetooth compression.
What are the best EQ settings for the Focal Celestee?+
AutoEQ's correction, based on oratory1990's measurements, adds about 5 dB around 4 kHz, adds about 4 dB around 8.3 kHz, cuts about 3 dB around 1.2 kHz, with a preamp of -5.6 dB. The exact values are on this page, ready to copy. Treat it as a neutral starting point and adjust to taste.
Why do my Focal Celestee sound bad on calls on a Mac?+
When an app uses the headphones' microphone, Bluetooth switches from stereo music mode to a hands-free call mode with much lower audio quality. To keep music quality during calls, choose your Mac's built-in microphone as the input instead. TuningMac's Input list does this in one click, and its Device Info shows which mode you're in.
Should I turn off the EQ in Focal's app?+
For the most accurate result, yes. An equalizer set in Focal's app is applied inside the headphones, so it also affects your Mac and would add to this correction. TuningMac's EQ only changes sound from your Mac, so it won't affect your phone.
Tune your Celestee on your Mac
Parametric and 10-band EQ, noise control and battery in the menu bar.
EQ data from AutoEQ by Jaakko Pasanen (MIT licence), measurement by oratory1990. Specifications from Focal's published specifications. Focal Celestee is a trademark of Focal; TuningMac is not affiliated with Focal.