SteelSeries Arctis 7+ EQ settings for Mac
Measured EQ correction for the SteelSeries Arctis 7+, the specs that matter, and what changes when you use them with a Mac. Copy the settings and apply them in one click.
The short answer
- Adds about 5 dB of sub-bass.
- Dips about 4 dB around 125–250 Hz.
- Adds about 4 dB around 800 Hz.
- Adds about 3 dB around 2.8 kHz.
- Cuts about 4 dB around 6 kHz.
- Cuts about 8 dB above 16 kHz.
Arctis 7+ at a glance
Wireless gaming headset with USB-C dongle and 30-hour battery, released in 2022. Official specifications from SteelSeries:
- Driver
- 40 mm neodymium
- Connection
- 2.4 GHz USB-C dongle
- Battery
- Up to 30 h
- Weight
- 354 g
Sources: SteelSeries: Arctis 7+.
Using the Arctis 7+ with a Mac
Codec: AAC. The Arctis 7+ support , and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates (44.1 or 48 kHz).
Calls sound worse than music. As soon as an app uses the headphones' microphone (Zoom, FaceTime, a dictation shortcut), Bluetooth switches to hands-free mode, which has much lower audio quality. Pick your Mac's built-in microphone as the input to keep the Arctis 7+ in stereo music mode.
2.4 GHz only The Arctis 7+ connects via a USB-C 2.4 GHz dongle only, no Bluetooth. Appears as a USB audio device on the Mac.
What the measurements show
This correction comes from AutoEQ, based on Rtings' measurements of the Arctis 7+. It shows how much to boost or cut at each frequency to bring the headphones closer to AutoEQ's neutral target:
- Adds about 5 dB of sub-bass.
- Dips about 4 dB around 125–250 Hz.
- Adds about 4 dB around 800 Hz.
- Adds about 3 dB around 2.8 kHz.
- Cuts about 4 dB around 6 kHz.
- Cuts about 8 dB above 16 kHz.
Fit, ear pads and your own ears all change what you hear, and neutral isn't everyone's favourite sound. Use this as a starting point, then adjust by ear.
Apply it in TuningMac (parametric EQ)
TuningMac's Advanced EQ imports this format directly. Copy the settings, then:
- Open TuningMac ▸ Settings ▸ Advanced EQ with your Arctis 7+ connected.
- Turn on Use Advanced EQ for Arctis 7+ (or whatever you've named them on your Mac).
- Choose More ▸ Paste from Clipboard.
TuningMac saves it for your Arctis 7+ and loads it whenever they connect.
Preamp: -5.2 dB Filter 1: ON LSC Fc 105 Hz Gain 6.7 dB Q 0.70 Filter 2: ON PK Fc 95 Hz Gain -6.6 dB Q 0.42 Filter 3: ON PK Fc 821 Hz Gain 3.8 dB Q 0.55 Filter 4: ON PK Fc 2837 Hz Gain 2.5 dB Q 2.18 Filter 5: ON PK Fc 238 Hz Gain -1.9 dB Q 1.73 Filter 6: ON HSC Fc 10000 Hz Gain -4.5 dB Q 0.70 Filter 7: ON PK Fc 5972 Hz Gain -3.7 dB Q 5.92 Filter 8: ON PK Fc 4932 Hz Gain 1.9 dB Q 5.60 Filter 9: ON PK Fc 10000 Hz Gain -0.5 dB Q 4.62 Filter 10: ON PK Fc 1337 Hz Gain 0.4 dB Q 3.89
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low Shelf | 105 Hz | +6.7 dB | 0.70 |
| 2 | Bell | 95 Hz | −6.6 dB | 0.42 |
| 3 | Bell | 821 Hz | +3.8 dB | 0.55 |
| 4 | Bell | 2.84 kHz | +2.5 dB | 2.18 |
| 5 | Bell | 238 Hz | −1.9 dB | 1.73 |
| 6 | High Shelf | 10 kHz | −4.5 dB | 0.70 |
| 7 | Bell | 5.97 kHz | −3.7 dB | 5.92 |
| 8 | Bell | 4.93 kHz | +1.9 dB | 5.60 |
| 9 | Bell | 10 kHz | −0.5 dB | 4.62 |
| 10 | Bell | 1.34 kHz | +0.4 dB | 3.89 |
Preamp: −5.2 dB. It lowers the overall level so the boosts don't clip.
Prefer simple sliders? The 10-band version
No Advanced EQ needed: AutoEQ also gives values for a standard 10-band equalizer, the same bands as TuningMac's main EQ. In the menu bar popover choose Custom, set each slider, and set the preamp to about −5.0 dB.
Values in dB, at 31 Hz to 16 kHz. The parametric version above is more precise.
Questions
Which codec do the SteelSeries Arctis 7+ use on a Mac?+
AAC. The Arctis 7+ support , and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates.
What are the best EQ settings for the SteelSeries Arctis 7+?+
AutoEQ's correction, based on Rtings' measurements, adds 5 dB of sub-bass, dips around 125–250 Hz, adds about 4 dB around 800 Hz, cuts treble above 10 kHz, with a preamp of -5.2 dB. The exact values are on this page, ready to copy. Treat it as a neutral starting point and adjust to taste.
Why do my SteelSeries Arctis 7+ sound bad on calls on a Mac?+
When an app uses the headphones' microphone, Bluetooth switches from stereo music mode to a hands-free call mode with much lower audio quality. To keep music quality during calls, choose your Mac's built-in microphone as the input instead. TuningMac's Input list does this in one click, and its Device Info shows which mode you're in.
Should I turn off the EQ in SteelSeries's app?+
For the most accurate result, yes. An equalizer set in SteelSeries's app is applied inside the headphones, so it also affects your Mac and would add to this correction. TuningMac's EQ only changes sound from your Mac, so it won't affect your phone.
Tune your Arctis 7+ on your Mac
Parametric and 10-band EQ, noise control and battery in the menu bar.
EQ data from AutoEQ by Jaakko Pasanen (MIT licence), measurement by Rtings. Specifications from SteelSeries's published specifications. SteelSeries Arctis 7+ is a trademark of SteelSeries; TuningMac is not affiliated with SteelSeries.