Skullcandy Crusher 360 EQ settings for Mac
Measured EQ correction for the Skullcandy Crusher 360, the specs that matter, and what changes when you use them with a Mac. Copy the settings and apply them in one click.
The short answer
- Dips about 3 dB around 125 Hz.
- Adds about 5 dB around 500 Hz and about 3 dB around 1 kHz.
- Cuts treble above 8 kHz by about 7–11 dB.
- Relatively flat bass response.
Crusher 360 at a glance
Wireless over-ear headphones with personal sound profiles, released in 2018. Official specifications from Skullcandy:
- Bluetooth version
- 5.0
- Bluetooth codecs
- AAC, SBC
Sources: Skullcandy: Crusher 360 specifications.
Using the Crusher 360 with a Mac
Codec: AAC. The Crusher 360 support AAC and SBC, and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates (44.1 or 48 kHz).
Calls sound worse than music. As soon as an app uses the headphones' microphone (Zoom, FaceTime, a dictation shortcut), Bluetooth switches to hands-free mode, which has much lower audio quality. Pick your Mac's built-in microphone as the input to keep the Crusher 360 in stereo music mode.
What the measurements show
This correction comes from AutoEQ, based on Rtings' measurements of the Crusher 360. It shows how much to boost or cut at each frequency to bring the headphones closer to AutoEQ's neutral target:
- Dips about 3 dB around 125 Hz.
- Adds about 5 dB around 500 Hz and about 3 dB around 1 kHz.
- Cuts treble above 8 kHz by about 7–11 dB.
- Relatively flat bass response.
Fit, ear pads and your own ears all change what you hear, and neutral isn't everyone's favourite sound. Use this as a starting point, then adjust by ear.
Apply it in TuningMac (parametric EQ)
TuningMac's Advanced EQ imports this format directly. Copy the settings, then:
- Open TuningMac ▸ Settings ▸ Advanced EQ with your Crusher 360 connected.
- Turn on Use Advanced EQ for Crusher 360 (or whatever you've named them on your Mac).
- Choose More ▸ Paste from Clipboard.
TuningMac saves it for your Crusher 360 and loads it whenever they connect.
Preamp: -4.5 dB Filter 1: ON LSC Fc 105 Hz Gain 0.9 dB Q 0.70 Filter 2: ON PK Fc 531 Hz Gain 5.4 dB Q 0.29 Filter 3: ON PK Fc 8732 Hz Gain -8.6 dB Q 1.40 Filter 4: ON PK Fc 163 Hz Gain -6.3 dB Q 0.67 Filter 5: ON PK Fc 3128 Hz Gain -5.5 dB Q 4.33 Filter 6: ON HSC Fc 10000 Hz Gain -4.9 dB Q 0.70 Filter 7: ON PK Fc 4931 Hz Gain 2.7 dB Q 3.29 Filter 8: ON PK Fc 6120 Hz Gain -3.4 dB Q 6.00 Filter 9: ON PK Fc 8703 Hz Gain 2.5 dB Q 3.12 Filter 10: ON PK Fc 466 Hz Gain 0.3 dB Q 1.74
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low Shelf | 105 Hz | +0.9 dB | 0.70 |
| 2 | Bell | 531 Hz | +5.4 dB | 0.29 |
| 3 | Bell | 8.73 kHz | −8.6 dB | 1.40 |
| 4 | Bell | 163 Hz | −6.3 dB | 0.67 |
| 5 | Bell | 3.13 kHz | −5.5 dB | 4.33 |
| 6 | High Shelf | 10 kHz | −4.9 dB | 0.70 |
| 7 | Bell | 4.93 kHz | +2.7 dB | 3.29 |
| 8 | Bell | 6.12 kHz | −3.4 dB | 6.00 |
| 9 | Bell | 8.7 kHz | +2.5 dB | 3.12 |
| 10 | Bell | 466 Hz | +0.3 dB | 1.74 |
Preamp: −4.5 dB. It lowers the overall level so the boosts don't clip.
Prefer simple sliders? The 10-band version
No Advanced EQ needed: AutoEQ also gives values for a standard 10-band equalizer, the same bands as TuningMac's main EQ. In the menu bar popover choose Custom, set each slider, and set the preamp to about −5.0 dB.
Values in dB, at 31 Hz to 16 kHz. The parametric version above is more precise.
Questions
Which codec do the Skullcandy Crusher 360 use on a Mac?+
AAC. The Crusher 360 support AAC and SBC, and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates.
What are the best EQ settings for the Skullcandy Crusher 360?+
AutoEQ's correction, based on Rtings' measurements, dips about 3 dB around 125 Hz, adds about 5 dB around 500 Hz, cuts upper treble sharply, with a preamp of -4.5 dB. The exact values are on this page, ready to copy. Treat it as a neutral starting point and adjust to taste.
Why do my Skullcandy Crusher 360 sound bad on calls on a Mac?+
When an app uses the headphones' microphone, Bluetooth switches from stereo music mode to a hands-free call mode with much lower audio quality. To keep music quality during calls, choose your Mac's built-in microphone as the input instead. TuningMac's Input list does this in one click, and its Device Info shows which mode you're in.
Should I turn off the EQ in Skullcandy's app?+
For the most accurate result, yes. An equalizer set in Skullcandy's app is applied inside the headphones, so it also affects your Mac and would add to this correction. TuningMac's EQ only changes sound from your Mac, so it won't affect your phone.
Tune your Crusher 360 on your Mac
Parametric and 10-band EQ, noise control and battery in the menu bar.
EQ data from AutoEQ by Jaakko Pasanen (MIT licence), measurement by Rtings. Specifications from Skullcandy's published specifications. Skullcandy Crusher 360 is a trademark of Skullcandy; TuningMac is not affiliated with Skullcandy.