Samsung Galaxy Buds+ EQ settings for Mac
Measured EQ correction for the Samsung Galaxy Buds+, the specs that matter, and what changes when you use them with a Mac. Copy the settings and apply them in one click.
The short answer
- Cuts sub-bass by about 5 dB.
- Cuts about 3 dB around 125 Hz.
- Adds about 2 dB around 250–500 Hz.
- Cuts about 3 dB above 16 kHz.
Galaxy Buds+ at a glance
Wireless earbuds without noise cancelling, released in 2020. Official specifications from Samsung:
- Bluetooth version
- 5.0
- Bluetooth codecs
- AAC, SBC
Sources: Samsung: Galaxy Buds+ specifications.
Using the Galaxy Buds+ with a Mac
Codec: AAC. The Galaxy Buds+ support AAC and SBC, and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates (44.1 or 48 kHz).
Calls sound worse than music. As soon as an app uses the earbuds' microphone (Zoom, FaceTime, a dictation shortcut), Bluetooth switches to hands-free mode, which has much lower audio quality. Pick your Mac's built-in microphone as the input to keep the Galaxy Buds+ in stereo music mode.
What the measurements show
This correction comes from AutoEQ, based on Rtings' measurements of the Galaxy Buds+. It shows how much to boost or cut at each frequency to bring the earbuds closer to AutoEQ's neutral target:
- Cuts sub-bass by about 5 dB.
- Cuts about 3 dB around 125 Hz.
- Adds about 2 dB around 250–500 Hz.
- Cuts about 3 dB above 16 kHz.
Fit, ear tips and your own ears all change what you hear, and neutral isn't everyone's favourite sound. Use this as a starting point, then adjust by ear.
Apply it in TuningMac (parametric EQ)
TuningMac's Advanced EQ imports this format directly. Copy the settings, then:
- Open TuningMac ▸ Settings ▸ Advanced EQ with your Galaxy Buds+ connected.
- Turn on Use Advanced EQ for Galaxy Buds+ (or whatever you've named them on your Mac).
- Choose More ▸ Paste from Clipboard.
TuningMac saves it for your Galaxy Buds+ and loads it whenever they connect.
Preamp: -3.1 dB Filter 1: ON LSC Fc 105 Hz Gain -4.9 dB Q 0.70 Filter 2: ON PK Fc 350 Hz Gain 2.0 dB Q 0.50 Filter 3: ON PK Fc 5337 Hz Gain -5.4 dB Q 2.62 Filter 4: ON PK Fc 6770 Hz Gain 4.3 dB Q 4.14 Filter 5: ON PK Fc 1863 Hz Gain -2.7 dB Q 1.84 Filter 6: ON HSC Fc 10000 Hz Gain -1.4 dB Q 0.70 Filter 7: ON PK Fc 73 Hz Gain 3.0 dB Q 2.05 Filter 8: ON PK Fc 3539 Hz Gain 0.7 dB Q 3.58 Filter 9: ON PK Fc 8534 Hz Gain -1.6 dB Q 3.54 Filter 10: ON PK Fc 112 Hz Gain -0.8 dB Q 2.54
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low Shelf | 105 Hz | −4.9 dB | 0.70 |
| 2 | Bell | 350 Hz | +2.0 dB | 0.50 |
| 3 | Bell | 5.34 kHz | −5.4 dB | 2.62 |
| 4 | Bell | 6.77 kHz | +4.3 dB | 4.14 |
| 5 | Bell | 1.86 kHz | −2.7 dB | 1.84 |
| 6 | High Shelf | 10 kHz | −1.4 dB | 0.70 |
| 7 | Bell | 73 Hz | +3.0 dB | 2.05 |
| 8 | Bell | 3.54 kHz | +0.7 dB | 3.58 |
| 9 | Bell | 8.53 kHz | −1.6 dB | 3.54 |
| 10 | Bell | 112 Hz | −0.8 dB | 2.54 |
Preamp: −3.1 dB. It lowers the overall level so the boosts don't clip.
Prefer simple sliders? The 10-band version
No Advanced EQ needed: AutoEQ also gives values for a standard 10-band equalizer, the same bands as TuningMac's main EQ. In the menu bar popover choose Custom, set each slider, and set the preamp to about −2.0 dB.
Values in dB, at 31 Hz to 16 kHz. The parametric version above is more precise.
Questions
Which codec do the Samsung Galaxy Buds+ use on a Mac?+
AAC. The Galaxy Buds+ support AAC and SBC, and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates.
What are the best EQ settings for the Samsung Galaxy Buds+?+
AutoEQ's correction, based on Rtings' measurements, cuts about 5 dB of sub-bass, cuts about 3 dB around 125 Hz, adds about 2 dB around 250–500 Hz, with a preamp of -3.1 dB. The exact values are on this page, ready to copy. Treat it as a neutral starting point and adjust to taste.
Why do my Samsung Galaxy Buds+ sound bad on calls on a Mac?+
When an app uses the earbuds' microphone, Bluetooth switches from stereo music mode to a hands-free call mode with much lower audio quality. To keep music quality during calls, choose your Mac's built-in microphone as the input instead. TuningMac's Input list does this in one click, and its Device Info shows which mode you're in.
Should I turn off the EQ in Samsung's app?+
For the most accurate result, yes. An equalizer set in Samsung's app is applied inside the earbuds, so it also affects your Mac and would add to this correction. TuningMac's EQ only changes sound from your Mac, so it won't affect your phone.
Tune your Galaxy Buds+ on your Mac
Parametric and 10-band EQ, noise control and battery in the menu bar.
EQ data from AutoEQ by Jaakko Pasanen (MIT licence), measurement by Rtings. Specifications from Samsung's published specifications. Samsung Galaxy Buds+ is a trademark of Samsung; TuningMac is not affiliated with Samsung.