Etymotic ER2XR EQ settings for Mac
Measured EQ correction for the Etymotic ER2XR, the specs that matter, and what changes when you use them with a Mac. Copy the settings and apply them in one click.
The short answer
- Adds about 6 dB around 8.5 kHz.
- Cuts about 4 dB around 2 kHz.
- Adds about 2 dB around 4.4 kHz.
- Cuts about 2 dB of high shelf above 10 kHz.
ER2XR at a glance
Wired in-ear monitor with extended-response dynamic driver, released in 2019. Official specifications from Etymotic:
- Driver
- Single dynamic
- Frequency response
- 20 Hz – 16 kHz
- Impedance
- 15 ohms
- Sensitivity
- 96 dB SPL/mW
- Connector
- MMCX (detachable cable)
Sources: Etymotic: ER2XR specifications.
Using the ER2XR with a Mac
Wired, so no Bluetooth codec. The ER2XR connect with a cable, so nothing is compressed on the way: plug them into the Mac's headphone jack, or a USB-C adapter or DAC.
Calls sound worse than music. As soon as an app uses the earbuds' microphone (Zoom, FaceTime, a dictation shortcut), Bluetooth switches to hands-free mode, which has much lower audio quality. Pick your Mac's built-in microphone as the input to keep the ER2XR in stereo music mode.
What the measurements show
This correction comes from AutoEQ, based on oratory1990's measurements of the ER2XR. It shows how much to boost or cut at each frequency to bring the earbuds closer to AutoEQ's neutral target:
- Adds about 6 dB around 8.5 kHz.
- Cuts about 4 dB around 2 kHz.
- Adds about 2 dB around 4.4 kHz.
- Cuts about 2 dB of high shelf above 10 kHz.
Fit, ear tips and your own ears all change what you hear, and neutral isn't everyone's favourite sound. Use this as a starting point, then adjust by ear.
Apply it in TuningMac (parametric EQ)
TuningMac's Advanced EQ imports this format directly. Copy the settings, then:
- Open TuningMac ▸ Settings ▸ Advanced EQ with your ER2XR connected.
- Turn on Use Advanced EQ for ER2XR (or whatever you've named them on your Mac).
- Choose More ▸ Paste from Clipboard.
TuningMac saves it for your ER2XR and loads it whenever they connect.
Preamp: -5.6 dB Filter 1: ON LSC Fc 105 Hz Gain 1.1 dB Q 0.70 Filter 2: ON PK Fc 8481 Hz Gain 6.0 dB Q 0.99 Filter 3: ON PK Fc 2066 Hz Gain -4.0 dB Q 1.19 Filter 4: ON PK Fc 199 Hz Gain -1.7 dB Q 1.31 Filter 5: ON PK Fc 4446 Hz Gain 1.8 dB Q 1.46 Filter 6: ON HSC Fc 10000 Hz Gain -1.9 dB Q 0.70 Filter 7: ON PK Fc 870 Hz Gain 1.4 dB Q 1.77 Filter 8: ON PK Fc 1339 Hz Gain -1.2 dB Q 2.97 Filter 9: ON PK Fc 71 Hz Gain 0.6 dB Q 1.61 Filter 10: ON PK Fc 131 Hz Gain -0.4 dB Q 2.32
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low Shelf | 105 Hz | +1.1 dB | 0.70 |
| 2 | Bell | 8.48 kHz | +6.0 dB | 0.99 |
| 3 | Bell | 2.07 kHz | −4.0 dB | 1.19 |
| 4 | Bell | 199 Hz | −1.7 dB | 1.31 |
| 5 | Bell | 4.45 kHz | +1.8 dB | 1.46 |
| 6 | High Shelf | 10 kHz | −1.9 dB | 0.70 |
| 7 | Bell | 870 Hz | +1.4 dB | 1.77 |
| 8 | Bell | 1.34 kHz | −1.2 dB | 2.97 |
| 9 | Bell | 71 Hz | +0.6 dB | 1.61 |
| 10 | Bell | 131 Hz | −0.4 dB | 2.32 |
Preamp: −5.6 dB. It lowers the overall level so the boosts don't clip.
Prefer simple sliders? The 10-band version
No Advanced EQ needed: AutoEQ also gives values for a standard 10-band equalizer, the same bands as TuningMac's main EQ. In the menu bar popover choose Custom, set each slider, and set the preamp to about −6.0 dB.
Values in dB, at 31 Hz to 16 kHz. The parametric version above is more precise.
Questions
Do the Etymotic ER2XR need a Bluetooth codec on a Mac?+
None: the ER2XR are wired. Plug them into the Mac's headphone jack, or a USB-C adapter or DAC, and the sound reaches them without Bluetooth compression.
What are the best EQ settings for the Etymotic ER2XR?+
AutoEQ's correction, based on oratory1990's measurements, adds about 6 dB around 8.5 kHz, cuts about 4 dB around 2 kHz, adds about 2 dB around 4.4 kHz, with a preamp of -5.6 dB. The exact values are on this page, ready to copy. Treat it as a neutral starting point and adjust to taste.
Why do my Etymotic ER2XR sound bad on calls on a Mac?+
When an app uses the earbuds' microphone, Bluetooth switches from stereo music mode to a hands-free call mode with much lower audio quality. To keep music quality during calls, choose your Mac's built-in microphone as the input instead. TuningMac's Input list does this in one click, and its Device Info shows which mode you're in.
Should I turn off the EQ in Etymotic's app?+
For the most accurate result, yes. An equalizer set in Etymotic's app is applied inside the earbuds, so it also affects your Mac and would add to this correction. TuningMac's EQ only changes sound from your Mac, so it won't affect your phone.
Tune your ER2XR on your Mac
Parametric and 10-band EQ, noise control and battery in the menu bar.
EQ data from AutoEQ by Jaakko Pasanen (MIT licence), measurement by oratory1990. Specifications from Etymotic's published specifications. Etymotic ER2XR is a trademark of Etymotic; TuningMac is not affiliated with Etymotic.