EarFun Air Pro 3 EQ settings for Mac
Measured EQ correction for the EarFun Air Pro 3, the specs that matter, and what changes when you use them with a Mac. Copy the settings and apply them in one click.
The short answer
- Cuts about 6 dB from the bass, from 31 to 125 Hz.
- Adds about 4 dB to the mids, from 500 Hz to 1 kHz.
- Cuts about 4 dB from the treble, from 4 to 8 kHz.
- Adds about 8 dB to the top treble, around 16 kHz.
Air Pro 3 at a glance
True wireless earbuds with hybrid ANC and aptX Adaptive. Official specifications from EarFun:
- Driver
- 11 mm wool composite
- ANC
- Hybrid, up to 43 dB
- Bluetooth
- 5.3
- Battery
- 7 h (ANC on) + 37 h total with the case
- Water resistance
- IPX5 (earbuds)
Sources: EarFun: Air Pro 3.
Using the Air Pro 3 with a Mac
Codec: SBC, not aptX Adaptive. The Air Pro 3 support SBC and aptX Adaptive. macOS doesn't support aptX Adaptive, and the earbuds don't offer AAC, so on a Mac they play over SBC, the standard Bluetooth codec every pair supports.
Calls sound worse than music. As soon as an app uses the earbuds' microphone (Zoom, FaceTime, a dictation shortcut), Bluetooth switches to hands-free mode, which has much lower audio quality. Pick your Mac's built-in microphone as the input to keep the Air Pro 3 in stereo music mode.
Multipoint. Connects to two devices at once.
Noise control. TuningMac can't switch EarFun's noise cancelling modes yet, so use the button on the earbuds or EarFun's app on your phone. The EQ, volume and output features all work.
What the measurements show
This correction comes from AutoEQ, based on Rtings' measurements of the Air Pro 3. It shows how much to boost or cut at each frequency to bring the earbuds closer to AutoEQ's neutral target:
- Cuts about 6 dB from the bass, from 31 to 125 Hz.
- Adds about 4 dB to the mids, from 500 Hz to 1 kHz.
- Cuts about 4 dB from the treble, from 4 to 8 kHz.
- Adds about 8 dB to the top treble, around 16 kHz.
Fit, ear tips and your own ears all change what you hear, and neutral isn't everyone's favourite sound. Use this as a starting point, then adjust by ear.
Apply it in TuningMac (parametric EQ)
TuningMac's Advanced EQ imports this format directly. Copy the settings, then:
- Open TuningMac ▸ Settings ▸ Advanced EQ with your Air Pro 3 connected.
- Turn on Use Advanced EQ for Air Pro 3 (or whatever you've named them on your Mac).
- Choose More ▸ Paste from Clipboard.
TuningMac saves it for your Air Pro 3 and loads it whenever they connect.
Preamp: -4.3 dB Filter 1: ON LSC Fc 105 Hz Gain -4.7 dB Q 0.70 Filter 2: ON PK Fc 696 Hz Gain 4.1 dB Q 1.06 Filter 3: ON PK Fc 6116 Hz Gain -5.8 dB Q 1.92 Filter 4: ON PK Fc 155 Hz Gain -2.6 dB Q 1.62 Filter 5: ON PK Fc 400 Hz Gain 1.8 dB Q 2.07 Filter 6: ON HSC Fc 10000 Hz Gain 3.7 dB Q 0.70 Filter 7: ON PK Fc 64 Hz Gain 0.5 dB Q 1.65 Filter 8: ON PK Fc 6914 Hz Gain -2.1 dB Q 6.00 Filter 9: ON PK Fc 6055 Hz Gain 1.5 dB Q 6.00 Filter 10: ON PK Fc 5264 Hz Gain -1.2 dB Q 6.00
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low Shelf | 105 Hz | −4.7 dB | 0.70 |
| 2 | Bell | 696 Hz | +4.1 dB | 1.06 |
| 3 | Bell | 6.12 kHz | −5.8 dB | 1.92 |
| 4 | Bell | 155 Hz | −2.6 dB | 1.62 |
| 5 | Bell | 400 Hz | +1.8 dB | 2.07 |
| 6 | High Shelf | 10 kHz | +3.7 dB | 0.70 |
| 7 | Bell | 64 Hz | +0.5 dB | 1.65 |
| 8 | Bell | 6.91 kHz | −2.1 dB | 6.00 |
| 9 | Bell | 6.05 kHz | +1.5 dB | 6.00 |
| 10 | Bell | 5.26 kHz | −1.2 dB | 6.00 |
Preamp: −4.3 dB. It lowers the overall level so the boosts don't clip.
Prefer simple sliders? The 10-band version
No Advanced EQ needed: AutoEQ also gives values for a standard 10-band equalizer, the same bands as TuningMac's main EQ. In the menu bar popover choose Custom, set each slider, and set the preamp to about −8.0 dB.
Values in dB, at 31 Hz to 16 kHz. The parametric version above is more precise.
Questions
Which codec do the EarFun Air Pro 3 use on a Mac?+
SBC. The Air Pro 3 support SBC and aptX Adaptive, but macOS doesn't support aptX Adaptive and they don't offer AAC, so a Mac uses SBC, the standard Bluetooth codec.
What are the best EQ settings for the EarFun Air Pro 3?+
AutoEQ's correction, based on Rtings' measurements, cuts about 6 dB from 31 to 125 Hz, adds about 4 dB from 500 Hz to 1 kHz, adds about 8 dB around 16 kHz, with a preamp of -4.3 dB. The exact values are on this page, ready to copy. Treat it as a neutral starting point and adjust to taste.
Why do my EarFun Air Pro 3 sound bad on calls on a Mac?+
When an app uses the earbuds' microphone, Bluetooth switches from stereo music mode to a hands-free call mode with much lower audio quality. To keep music quality during calls, choose your Mac's built-in microphone as the input instead. TuningMac's Input list does this in one click, and its Device Info shows which mode you're in.
Can I control the EarFun Air Pro 3's noise cancelling from a Mac?+
Not yet. TuningMac can't switch EarFun's noise cancelling modes yet, so use the button on the earbuds or EarFun's app on your phone. The EQ, volume and output features all work.
Should I turn off the EQ in EarFun's app?+
For the most accurate result, yes. An equalizer set in EarFun's app is applied inside the earbuds, so it also affects your Mac and would add to this correction. TuningMac's EQ only changes sound from your Mac, so it won't affect your phone.
Tune your Air Pro 3 on your Mac
Parametric and 10-band EQ, noise control and battery in the menu bar.
EQ data from AutoEQ by Jaakko Pasanen (MIT licence), measurement by Rtings. Specifications from EarFun's published specifications. EarFun Air Pro 3 is a trademark of EarFun; TuningMac is not affiliated with EarFun.