Bose SoundSport Wireless EQ settings for Mac
Measured EQ correction for the Bose SoundSport Wireless, the specs that matter, and what changes when you use them with a Mac. Copy the settings and apply them in one click.
The short answer
- Turns the bass down by about 4 to 5 dB from 31 to 125 Hz.
- Lifts the mids around 1 to 2 kHz by about 2 dB.
- Adds about 3 dB around 4 to 8 kHz for detail.
SoundSport Wireless at a glance
Wireless neckband sport earbuds, sold by Bose from 2016 to 2018. Official specifications from Bose:
- Bluetooth version
- 4.2
- Bluetooth profiles
- A2DP, AVRCP, HFP, HSP, Bluetooth Low Energy
- Range
- Up to 9 m (30 ft)
Sources: Bose: SoundSport Wireless specifications.
Using the SoundSport Wireless with a Mac
Codec: AAC. The SoundSport Wireless support SBC and AAC, and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates (44.1 or 48 kHz).
Calls sound worse than music. As soon as an app uses the earbuds' microphone (Zoom, FaceTime, a dictation shortcut), Bluetooth switches to hands-free mode, which has much lower audio quality. Pick your Mac's built-in microphone as the input to keep the SoundSport Wireless in stereo music mode.
Noise control. TuningMac can't switch Bose's noise cancelling modes yet, so use the button on the earbuds or Bose's app on your phone. The EQ, volume and output features all work.
What the measurements show
This correction comes from AutoEQ, based on oratory1990's measurements of the SoundSport Wireless. It shows how much to boost or cut at each frequency to bring the earbuds closer to AutoEQ's neutral target:
- Turns the bass down by about 4 to 5 dB from 31 to 125 Hz.
- Lifts the mids around 1 to 2 kHz by about 2 dB.
- Adds about 3 dB around 4 to 8 kHz for detail.
Fit, ear tips and your own ears all change what you hear, and neutral isn't everyone's favourite sound. Use this as a starting point, then adjust by ear.
Apply it in TuningMac (parametric EQ)
TuningMac's Advanced EQ imports this format directly. Copy the settings, then:
- Open TuningMac ▸ Settings ▸ Advanced EQ with your SoundSport Wireless connected.
- Turn on Use Advanced EQ for SoundSport Wireless (or whatever you've named them on your Mac).
- Choose More ▸ Paste from Clipboard.
TuningMac saves it for your SoundSport Wireless and loads it whenever they connect.
Preamp: -3.5 dB Filter 1: ON LSC Fc 105 Hz Gain -4.1 dB Q 0.70 Filter 2: ON PK Fc 196 Hz Gain -4.5 dB Q 0.73 Filter 3: ON PK Fc 1534 Hz Gain 2.7 dB Q 1.19 Filter 4: ON PK Fc 6346 Hz Gain 3.4 dB Q 1.30 Filter 5: ON PK Fc 594 Hz Gain 0.9 dB Q 1.25 Filter 6: ON HSC Fc 10000 Hz Gain 1.0 dB Q 0.70 Filter 7: ON PK Fc 39 Hz Gain -0.7 dB Q 2.54 Filter 8: ON PK Fc 69 Hz Gain 0.4 dB Q 1.68 Filter 9: ON PK Fc 4344 Hz Gain 1.1 dB Q 5.54 Filter 10: ON PK Fc 5236 Hz Gain -1.2 dB Q 6.00
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low Shelf | 105 Hz | −4.1 dB | 0.70 |
| 2 | Bell | 196 Hz | −4.5 dB | 0.73 |
| 3 | Bell | 1.53 kHz | +2.7 dB | 1.19 |
| 4 | Bell | 6.35 kHz | +3.4 dB | 1.30 |
| 5 | Bell | 594 Hz | +0.9 dB | 1.25 |
| 6 | High Shelf | 10 kHz | +1.0 dB | 0.70 |
| 7 | Bell | 39 Hz | −0.7 dB | 2.54 |
| 8 | Bell | 69 Hz | +0.4 dB | 1.68 |
| 9 | Bell | 4.34 kHz | +1.1 dB | 5.54 |
| 10 | Bell | 5.24 kHz | −1.2 dB | 6.00 |
Preamp: −3.5 dB. It lowers the overall level so the boosts don't clip.
Prefer simple sliders? The 10-band version
No Advanced EQ needed: AutoEQ also gives values for a standard 10-band equalizer, the same bands as TuningMac's main EQ. In the menu bar popover choose Custom, set each slider, and set the preamp to about −3.0 dB.
Values in dB, at 31 Hz to 16 kHz. The parametric version above is more precise.
Questions
Which codec do the Bose SoundSport Wireless use on a Mac?+
AAC. The SoundSport Wireless support SBC and AAC, and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates.
What are the best EQ settings for the Bose SoundSport Wireless?+
AutoEQ's correction, based on oratory1990's measurements, turns the bass down by about 4 dB, adds about 3 dB around 4 to 8 kHz, with a preamp of -3.5 dB. The exact values are on this page, ready to copy. Treat it as a neutral starting point and adjust to taste.
Why do my Bose SoundSport Wireless sound bad on calls on a Mac?+
When an app uses the earbuds' microphone, Bluetooth switches from stereo music mode to a hands-free call mode with much lower audio quality. To keep music quality during calls, choose your Mac's built-in microphone as the input instead. TuningMac's Input list does this in one click, and its Device Info shows which mode you're in.
Can I control the Bose SoundSport Wireless's noise cancelling from a Mac?+
Not yet. TuningMac can't switch Bose's noise cancelling modes yet, so use the button on the earbuds or Bose's app on your phone. The EQ, volume and output features all work.
Should I turn off the EQ in Bose's app?+
For the most accurate result, yes. An equalizer set in Bose's app is applied inside the earbuds, so it also affects your Mac and would add to this correction. TuningMac's EQ only changes sound from your Mac, so it won't affect your phone.
Tune your SoundSport Wireless on your Mac
Parametric and 10-band EQ, noise control and battery in the menu bar.
EQ data from AutoEQ by Jaakko Pasanen (MIT licence), measurement by oratory1990. Specifications from Bose's published specifications. Bose SoundSport Wireless is a trademark of Bose; TuningMac is not affiliated with Bose.