Bose QuietComfort 15 EQ settings for Mac
Measured EQ correction for the Bose QuietComfort 15, the specs that matter, and what changes when you use them with a Mac. Copy the settings and apply them in one click.
The short answer
- Adjusts the bass at 31 to 125 Hz by up to about 2 dB.
- Leaves the mids close to flat around 500 Hz to 2 kHz.
- Small tweaks elsewhere keep the curve close to AutoEQ's neutral target.
QC15 at a glance
Over-ear headphones with noise cancelling, sold by Bose from 2009 to 2014. Official specifications from Bose:
- Connection
- Wired (3.5 mm)
- Battery life
- Up to 35 hours (AAA battery)
Sources: Bose: QuietComfort 15 specifications.
Using the QC15 with a Mac
Codec: AAC. The QC15 support , and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates (44.1 or 48 kHz).
Calls sound worse than music. As soon as an app uses the headphones' microphone (Zoom, FaceTime, a dictation shortcut), Bluetooth switches to hands-free mode, which has much lower audio quality. Pick your Mac's built-in microphone as the input to keep the QC15 in stereo music mode.
Noise control. TuningMac can't switch Bose's noise cancelling modes yet, so use the button on the headphones or Bose's app on your phone. The EQ, volume and output features all work.
What the measurements show
This correction comes from AutoEQ, based on Innerfidelity's measurements of the QC15. It shows how much to boost or cut at each frequency to bring the headphones closer to AutoEQ's neutral target:
- Adjusts the bass at 31 to 125 Hz by up to about 2 dB.
- Leaves the mids close to flat around 500 Hz to 2 kHz.
- Small tweaks elsewhere keep the curve close to AutoEQ's neutral target.
Fit, ear pads and your own ears all change what you hear, and neutral isn't everyone's favourite sound. Use this as a starting point, then adjust by ear.
Apply it in TuningMac (parametric EQ)
TuningMac's Advanced EQ imports this format directly. Copy the settings, then:
- Open TuningMac ▸ Settings ▸ Advanced EQ with your QC15 connected.
- Turn on Use Advanced EQ for QC15 (or whatever you've named them on your Mac).
- Choose More ▸ Paste from Clipboard.
TuningMac saves it for your QC15 and loads it whenever they connect.
Preamp: -3.1 dB Filter 1: ON LSC Fc 105 Hz Gain 2.9 dB Q 0.70 Filter 2: ON PK Fc 102 Hz Gain -3.6 dB Q 0.23 Filter 3: ON PK Fc 585 Hz Gain 3.1 dB Q 0.80 Filter 4: ON PK Fc 5913 Hz Gain -5.1 dB Q 6.00 Filter 5: ON PK Fc 4324 Hz Gain -3.4 dB Q 6.00 Filter 6: ON HSC Fc 10000 Hz Gain 0.2 dB Q 0.70 Filter 7: ON PK Fc 3408 Hz Gain 2.4 dB Q 6.00 Filter 8: ON PK Fc 1216 Hz Gain -0.9 dB Q 4.24 Filter 9: ON PK Fc 8293 Hz Gain 3.3 dB Q 5.26 Filter 10: ON PK Fc 43 Hz Gain -0.2 dB Q 1.84
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low Shelf | 105 Hz | +2.9 dB | 0.70 |
| 2 | Bell | 102 Hz | −3.6 dB | 0.23 |
| 3 | Bell | 585 Hz | +3.1 dB | 0.80 |
| 4 | Bell | 5.91 kHz | −5.1 dB | 6.00 |
| 5 | Bell | 4.32 kHz | −3.4 dB | 6.00 |
| 6 | High Shelf | 10 kHz | +0.2 dB | 0.70 |
| 7 | Bell | 3.41 kHz | +2.4 dB | 6.00 |
| 8 | Bell | 1.22 kHz | −0.9 dB | 4.24 |
| 9 | Bell | 8.29 kHz | +3.3 dB | 5.26 |
| 10 | Bell | 43 Hz | −0.2 dB | 1.84 |
Preamp: −3.1 dB. It lowers the overall level so the boosts don't clip.
Prefer simple sliders? The 10-band version
No Advanced EQ needed: AutoEQ also gives values for a standard 10-band equalizer, the same bands as TuningMac's main EQ. In the menu bar popover choose Custom, set each slider, and set the preamp to about −2.0 dB.
Values in dB, at 31 Hz to 16 kHz. The parametric version above is more precise.
Questions
Which codec do the Bose QuietComfort 15 use on a Mac?+
AAC. The QC15 support , and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates.
What are the best EQ settings for the Bose QuietComfort 15?+
AutoEQ's correction, based on Innerfidelity's measurements, keeps changes within about 2 dB across the curve, with a preamp of -3.1 dB. The exact values are on this page, ready to copy. Treat it as a neutral starting point and adjust to taste.
Why do my Bose QuietComfort 15 sound bad on calls on a Mac?+
When an app uses the headphones' microphone, Bluetooth switches from stereo music mode to a hands-free call mode with much lower audio quality. To keep music quality during calls, choose your Mac's built-in microphone as the input instead. TuningMac's Input list does this in one click, and its Device Info shows which mode you're in.
Can I control the Bose QuietComfort 15's noise cancelling from a Mac?+
Not yet. TuningMac can't switch Bose's noise cancelling modes yet, so use the button on the headphones or Bose's app on your phone. The EQ, volume and output features all work.
Should I turn off the EQ in Bose's app?+
For the most accurate result, yes. An equalizer set in Bose's app is applied inside the headphones, so it also affects your Mac and would add to this correction. TuningMac's EQ only changes sound from your Mac, so it won't affect your phone.
Tune your QC15 on your Mac
Parametric and 10-band EQ, noise control and battery in the menu bar.
EQ data from AutoEQ by Jaakko Pasanen (MIT licence), measurement by Innerfidelity. Specifications from Bose's published specifications. Bose QuietComfort 15 is a trademark of Bose; TuningMac is not affiliated with Bose.