Beyerdynamic DT 700 Pro X EQ settings for Mac
Measured EQ correction for the Beyerdynamic DT 700 Pro X, the specs that matter, and what changes when you use them with a Mac. Copy the settings and apply them in one click.
The short answer
- Adds about 3 dB of sub-bass at 31 Hz.
- Dips about 2 dB around 62 Hz.
- Cuts about 2 dB around 4 kHz.
- Cuts about 6 dB above 16 kHz.
DT 700 Pro X at a glance
Closed-back studio headphones (48 Ohm), released in 2021. Official specifications from Beyerdynamic:
Using the DT 700 Pro X with a Mac
Codec: AAC. The DT 700 Pro X support , and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates (44.1 or 48 kHz).
Calls sound worse than music. As soon as an app uses the headphones' microphone (Zoom, FaceTime, a dictation shortcut), Bluetooth switches to hands-free mode, which has much lower audio quality. Pick your Mac's built-in microphone as the input to keep the DT 700 Pro X in stereo music mode.
What the measurements show
This correction comes from AutoEQ, based on oratory1990's measurements of the DT 700 Pro X. It shows how much to boost or cut at each frequency to bring the headphones closer to AutoEQ's neutral target:
- Adds about 3 dB of sub-bass at 31 Hz.
- Dips about 2 dB around 62 Hz.
- Cuts about 2 dB around 4 kHz.
- Cuts about 6 dB above 16 kHz.
Fit, ear pads and your own ears all change what you hear, and neutral isn't everyone's favourite sound. Use this as a starting point, then adjust by ear.
Apply it in TuningMac (parametric EQ)
TuningMac's Advanced EQ imports this format directly. Copy the settings, then:
- Open TuningMac ▸ Settings ▸ Advanced EQ with your DT 700 Pro X connected.
- Turn on Use Advanced EQ for DT 700 Pro X (or whatever you've named them on your Mac).
- Choose More ▸ Paste from Clipboard.
TuningMac saves it for your DT 700 Pro X and loads it whenever they connect.
Preamp: -4.3 dB Filter 1: ON LSC Fc 105 Hz Gain 4.8 dB Q 0.70 Filter 2: ON PK Fc 4553 Hz Gain -5.3 dB Q 3.09 Filter 3: ON PK Fc 62 Hz Gain -3.6 dB Q 0.62 Filter 4: ON PK Fc 6182 Hz Gain 2.1 dB Q 5.50 Filter 5: ON PK Fc 2262 Hz Gain 1.8 dB Q 1.02 Filter 6: ON HSC Fc 10000 Hz Gain -5.9 dB Q 0.70 Filter 7: ON PK Fc 7706 Hz Gain -3.7 dB Q 3.37 Filter 8: ON PK Fc 3274 Hz Gain -0.7 dB Q 5.66 Filter 9: ON PK Fc 171 Hz Gain -0.4 dB Q 2.54 Filter 10: ON PK Fc 1148 Hz Gain -0.5 dB Q 2.84
| # | Type | Frequency | Gain | Q |
|---|---|---|---|---|
| 1 | Low Shelf | 105 Hz | +4.8 dB | 0.70 |
| 2 | Bell | 4.55 kHz | −5.3 dB | 3.09 |
| 3 | Bell | 62 Hz | −3.6 dB | 0.62 |
| 4 | Bell | 6.18 kHz | +2.1 dB | 5.50 |
| 5 | Bell | 2.26 kHz | +1.8 dB | 1.02 |
| 6 | High Shelf | 10 kHz | −5.9 dB | 0.70 |
| 7 | Bell | 7.71 kHz | −3.7 dB | 3.37 |
| 8 | Bell | 3.27 kHz | −0.7 dB | 5.66 |
| 9 | Bell | 171 Hz | −0.4 dB | 2.54 |
| 10 | Bell | 1.15 kHz | −0.5 dB | 2.84 |
Preamp: −4.3 dB. It lowers the overall level so the boosts don't clip.
Prefer simple sliders? The 10-band version
No Advanced EQ needed: AutoEQ also gives values for a standard 10-band equalizer, the same bands as TuningMac's main EQ. In the menu bar popover choose Custom, set each slider, and set the preamp to about −3.0 dB.
Values in dB, at 31 Hz to 16 kHz. The parametric version above is more precise.
Questions
Which codec do the Beyerdynamic DT 700 Pro X use on a Mac?+
AAC. The DT 700 Pro X support , and a Mac picks AAC, the better of the two. It carries the full 20 Hz to 20 kHz range at standard sample rates.
What are the best EQ settings for the Beyerdynamic DT 700 Pro X?+
AutoEQ's correction, based on oratory1990's measurements, adds about 3 dB of sub-bass, cuts about 2 dB around 4 kHz, cuts about 6 dB above 16 kHz, with a preamp of -4.3 dB. The exact values are on this page, ready to copy. Treat it as a neutral starting point and adjust to taste.
Why do my Beyerdynamic DT 700 Pro X sound bad on calls on a Mac?+
When an app uses the headphones' microphone, Bluetooth switches from stereo music mode to a hands-free call mode with much lower audio quality. To keep music quality during calls, choose your Mac's built-in microphone as the input instead. TuningMac's Input list does this in one click, and its Device Info shows which mode you're in.
Should I turn off the EQ in Beyerdynamic's app?+
For the most accurate result, yes. An equalizer set in Beyerdynamic's app is applied inside the headphones, so it also affects your Mac and would add to this correction. TuningMac's EQ only changes sound from your Mac, so it won't affect your phone.
Tune your DT 700 Pro X on your Mac
Parametric and 10-band EQ, noise control and battery in the menu bar.
EQ data from AutoEQ by Jaakko Pasanen (MIT licence), measurement by oratory1990. Specifications from Beyerdynamic's published specifications. Beyerdynamic DT 700 Pro X is a trademark of Beyerdynamic; TuningMac is not affiliated with Beyerdynamic.